When you measure and consider the size that you need. The
dimensions that we show are measured from the bottom. However, the cover
slants inward about 5 inches. For instance a 25 x 25 X 12 is 20 x 20 at
the top. So, order a size a bit bigger than what you may need if you
think the cover may hit your roof vent when you install the vent cover.
7x7x9 each
$69.00
25x25x6
each $86.00
11x11x13 each $72.00
25x25x12
each $89.00
16x16x5 each
$79.00
30x30x12
each $98.00
Temp-Vent
foundation vent
systems
Help
Protect Foundations with Temp Vent
The
foundation is critical to the integrity of the home. That’s
why foundation ventilation is critical. Unventilated
foundations are subject to built-up moisture that can
eventually lead to costly damage.
Temp Vent foundation
vent systems help protect this critical area of the
home. What’s more, ventilation can help control
conditions that lead to mold, mildew, fungi, damp rot
and unhealthy air.
But
there’s more. If there’s one thing
termites are attracted to, it’s warm, moist, dead
air environments such as those found under houses in
crawl spaces or unfinished basements.
Temp-Vent foundation
vents are designed to provide ventilation that can
reduce moisture in these areas, which helps control
termites.
Temp-Vent foundation vents help control moisture
build-up and termites in crawl spaces and are
available right here for your convenience.
Automatic Foundation Vents The non-powered,
Automatic Foundation Vent will open and close automatically
using a heat/cold sensitive coil. The louvers open completely
at approximately 72°F and completely close at approximately
38°F. Unlike manual vents that can waste energy when no one
remembers to open or close them, these vents self-adjust all
year long.
Vented vs. Sealed Crawlspaces
To Specify:
Whenever possible, vents should be placed on all sides of the
foundation. This will create an intake/exhaust system that
delivers a steady flow of air. One vent should be installed
for each 8 to 10 feet of foundation wall.
Most building codes require 1
square foot of open ventilation area for every 150 square feet
of crawl space. Temp Vent Automatic Foundation Vents have 50
inches of net free area per vent. Therefore, you should
install one vent for every 50 square feet of crawl space.
For crawl spaces with
polyethylene installed, on 80-90% of the ground, the
ventilation requirement changes to 1 square foot of
ventilation for every 500 square feet of crawl space with a
minimum of 4 vents installed to provide cross ventilation. For
crawl spaces with polyethylene, install at least one vent
for every 500 square feet of crawl space.
Installation Tips for
Automatic Foundation Vents
For proper
ventilation, one vent should be installed every 8-10
feet.
Avoid dead
air spaced by placing vents within 3 feet of each
corner.
A minimum of
4 vents are required to provide cross-ventilation.
Dense
shrubbery should be trimmed for the vents to be effective.
Warranty for
Automatic Foundation Vents
Temp-Vents
are warranted forever.
Warranty
applies, no matter who owns the house
Note: This is
the original Automatic Vents (Patent in the 60's) All other
auto vents are clones of this vent and only have one year
warranties plus the product materials are not of the same
quality materials as the Temp-Vent.
Decay cost homeowners $1 Billion annually
·
Ventilation is a defense against excess moisture
and
foundation decay. · Saves fuel, money and time - Mother Nature
controls
your vents. · Replaces old-fashioned manual
foundation vent. · Helps in termite control. · Helps prevent frozen water and sewer pipes. · No electricity - automatically opens at 720F
-
closes at 380F (Approx.).
8 x 16 vent
Actual dimensions of the
vent that fits in the vent hole is 7¾
x 15½
with a depth of 4
5/8
inches. The over all dimensions including the lip is 9¾
x 17½.
Another Image of an installed TempVent up close
The
back of the vent is removable for easy cleaning
and maintenance
The Series 6 vents are one piece, while the Series 5
vents have a removable front frame (in addition to the
removable back) that can be snapped on after
installation. Series 5 also comes with a 2 inch
oversized frame.
Automatic
Vents
Description
Model
Colors
Temp
Vent Series 6
TV6
black,
brown, gray & white
Temp
Vent Series 5 - removable front frame
TV5
black,
brown, gray
Temp
Vent Series 5 with oversized frame
TV5-OSF
black
ORDER
TV6 FREE SHIPPING
on ALL FOUNDATION VENTS
Earthtone
Brown
Jet
Black
$49.00
each
$49.00
each
12cs.@
$540.00
12cs.@
$540.00
Driftwood
Gray
White
$49.00
each
$53.00
each
12cs.@
$540.00
12cs.@
$588.00
Special
pricing below does not apply to White Vents
Orders of
15 to 48 vents...............$43.00 each
Any
orders over 48 must be 12 to a case orders
Orders
of 49 to 96 vents...............$35.00
each
Orders
of 97 to 144 vents.............$33.00
each
Orders
of 145 to 168 vents...........$29.00 each
Best
to call these orders in at 1.877.800.6884
ORDER
TV5 - Removable Front Frame FREE
SHIPPING on ALL FOUNDATION VENTS
Earthtone
Brown
Jet
Black
Driftwood
Gray
$54.50
each
$54.50
each
$54.50
each
12CS.
@ $606.00
12CS.
@ $606.00
12CS.
@ $606.00
Orders of
15 to 48 vents...............$47.50 each Any orders over 48 must be 12 to a case orders
Orders
of 49 to 96 vents...............$39.50
each
Orders
of 97 to 144 vents.............$37.50
each
Orders
of 145 to 168 vents...........$31.50 each
Best
to call these orders in at 1.877.800.6884
ORDER
TV5/OSF - Oversized Frame
The size
of the Frame
for theTV5 / OSF Vent
is W 111/2 in x L
171/8 in
FREE
SHIPPING on ALL FOUNDATION VENTS Oversized Frames only come in
black.
Removable front frame can be painted to the color you desire
Jet
Black
$59.50
each
12CS.
@ $699.00
Orders of
13 to 48 vents...............$58.00 each Any orders over 48 must be 12 to a case orders
Orders
of 49 to 96 vents...............$53.50
each
Orders
of 97 to 144 vents.............$50.50
each
Orders
of 145 to 168 vents...........$45.50 each
Best
to call these orders in at 1.877.800.6884
Power
Foundation Vents
For homes that require a higher
rate of airflow, the Power Temp Vent is the ideal choice.
Powered vents are quick, convenient and economical when it
comes to controlling moisture and odor problems.
Air is suctioned out of the crawl space and replaced with
fresh outside air. Negative pressure helps prevent dampness
and odor from rising into living areas of the home.
$76.95 includes a video on how to
install. Specify rear or side vent when ordering.
Note:
Make sure there is nothing in the path between the vent hole of
the dryer and the hole out the rear wall. (Like an electrical
outlet or hose connections) If your not sure of our meaning, just
email us with a couple of images attached & we will quickly
reply with an answer.
The Safest Way To Vent A Clothes Dryer
There are over 13,000 fires every year caused by lint build-up in
plastic flex hose.
Reduces Fire Hazards
Faster Drying Time
Saves Energy and Money
Fewer Service Calls
Meets Highest Manufacture Recommendations for Exhaust Venting
Eliminates Plastic Flex Hose
The patented Quick connect combines convenience easy moving of dryer with safety all metal
construction. In addition your cost should be returned to you over a period of time
through faster drying cycles and fewer service call.
SO
You get a safer home, greater
convenience and quicker drying.
Ordering Information:
FREE
SHIPPING
AlMetal
Quick Connect - Rear $76.95
FREE
SHIPPING
AlMetal Quick Connect- Side $76.95
Weep
Hole Vent Covers
Weep Hole Cover™
For existing construction Keeps bugs out!
Closing the door to bugs, rodents, and
snakes in your home or business!
DESIGN FEATURES: Most common method for
rats, mice, roaches, snakes, spiders, scorpions and lizards etc.
to enter the home is through the brick weep holes.
During the construction phase of brick-veneer
structures, gaps called weep holes are purposely built into the
lower layer of bricks in order to allow the wall to drain and
ventilate. The unfortunate draw back of weep holes is that they
allow pests free access to the interior of your walls.
Weep Hole Covers were developed to
eliminate weep holes as a door to bugs. This weep hole cover
design will stop rodents or bugs from entering your home via the
weep holes while at the same time allowing the wall to
ventilate.
(Mice only need a 3/8" opening). Helps
maintain good indoor air quality objectives accepted by US EPA
while allowing weep holes to drain/vent.
25 Pieces in a Pack
6 Packs per Box
Each piece is 5" long. Measure your
width of brick and count the weep holes
you have to cover. Many times you can
cover 2 weep holes with one 5" Weep Hole
Cover
$2.50
ea.
Must order 10
vents or more to receive free shipping. (If your order
is for 9 vents or
less, shipping will be added laterDETAILS
We usually ship these orders Priority Mail
Order Pack of 25
$49.50 FREE
SHIPPING
Order Box of 6 packs (150 Pieces)
$224.95 FREE
SHIPPING
![visa[1].gif (1920 bytes)](visa[1].gif){kind=small}
![mc[1].gif (2076 bytes)](mc[1].gif){kind=small}
